Aluminium hexagonal rods 10 mm AlCuMgPb (AlCu4PbMgMn)
Is often purchased together with
Is often purchased together with
You might also be interested in
You might also be interested in
Product information
- Material: AlCuMgPb
- Material number: EN AW 2007 3.1645
- Surface: raw/bright
- Manufacturing process: drawn
- Standard: EN 573-3, 754/-1/-2/-6
- Delivery condition: T3 according to EN 515
The sawn edges are unfinished and not deburred. The surface is raw/bright, so scratches etc. cannot be avoided. This is normal in the trade and is no reason for complaint. Nevertheless, we always endeavour to supply all cut-to-size pieces in the best quality.
Product properties:
- Very good machinability. (Ideal for turning, milling, drilling, etc.)
- Not suitable for welding, anodising and powder coating
Aluminium hexagonal bars are a semi-finished product and, like square bars, can be used in many different ways. They are particularly common in mechanical engineering, for example as drive shafts. However, they are also used in vehicle construction and electrical engineering.
We have high-quality hexagonal rods in stock in lengths of up to 3000 mm. If you require a dimension that is not offered in our online configurator, please contact us.
Please note that the surface finish of the ordered product may differ from the product images due to different production batches. The same applies to colours, which are displayed differently depending on the monitor and graphics card.
Product safety information according to the product safety regulation for aluminium rods
(Article number: LM-16059)
1. general safety information 
- Caution: Aluminium rods are lighter than stainless steel, but may have sharp edges and burrs at the ends. Wear suitable protective gloves, safety goggles and safety shoes when handling and transporting to avoid cuts, crushing and eye injuries.
Danger: Sharp edges or burrs can cause serious injuries! - Take care with sharp edges: Before processing or installation, the material should be smoothed with a file or deburring tool if necessary to prevent injuries.
Caution: Process the edges before use to avoid cutting injuries. - Tip: Especially with heavy or long poles, call in a second person for support to avoid accidents. Do not drag poles across the floor to prevent surface damage. Use suitable safety straps during transport to avoid scratches.
2. mechanical safety 
- Processing: Always wear safety goggles, a respirator, protective gloves and safety shoes when sawing, drilling or grinding the material. Danger: Dust and splinters can cause eye and respiratory injuries .
- Assembly: Ensure that the bars are mounted firmly and stably to prevent accidents. Caution: Improper assembly can lead to instability and risk of injury.
3. storage and handling 
- Make sure that the bars are not dropped or bumped hard, as this can lead to dents or damage.
- In the case of coated rods, impact could cause coatings to flake off, which would impair corrosion resistance and appearance. Caution: Damage to the coating reduces the service life of the product.
- Storage: Store the bars horizontally and on a stable surface to prevent them from rolling away or falling. Store in dry, well-ventilated areas to prevent oxidation (tarnishing) of the material and staining. Caution: Improper storage increases the risk of injury and damage.
- Avoid heavy lifting: Aluminium rods are lighter than stainless steel, but suitable lifting and transport aids should be used for heavy or long rods. Use a second person if necessary. Caution: Improper lifting can lead to back injuries.
4. keep children and pets away 
- Keepaluminium poles and their packaging materials out of the reach of children and pets.
- There is a risk that children and pets may use the products as toys or be at risk of injury. Sharp edges and the weight of the material can lead toserious cuts and crushing injuries!
5. maintenance and care
- Only use mild cleaning agents and a soft cloth for cleaning. Never use scouring pads, steel wire brushes or abrasive cleaning utensils.
- Do not use abrasive cleaning agents or scratching cleaning utensils. These can scratch the surface and damage the protective oxide layer.
- In the event of heavy soiling, only clean with water and mild detergents.
- Do not use chemicals, as these can discolour or damage the surface. This can promote corrosion.
- High-pressure cleaners - The use of high-pressure cleaners can damage the surface, especially on coated or painted bars, and promote corrosion .
- Cleaning at high temperatures - Avoid cleaning with hot water or steam as this can tarnish the aluminium and dissolve the coating.
- Saline or abrasive cleaning agents - Cleaning agents containing salts or abrasives can roughen the surface and impair corrosion resistance .
- Tip: Dry the aluminium with a soft cloth to prevent water stains or oxidation (tarnishing). This will keep the protective oxide layer intact and the surface of the aluminium will remain beautiful for a long time.
6. use in the intended area
- This product is designed for railings, handrails, machine components, struts, tie rods or curtain poles . Do not use the rods as a load-bearing element if no static calculations are available.
Caution: If used as a load-bearing element without static calculations, there is a risk of collapse.
7 Temperature resistance
- Aluminium is thermally conductive and can heat up considerably at high temperatures. Avoid direct contact with hot surfaces or open flames to prevent burns .
Danger: Direct contact with hot surfaces can cause burns.
8. manufacturer information
Contact information:
LANGLITZ Metalle GmbH
Siemensweg 6, 48493 Wettringen, Germany
www.metalxact.com
Phone: +49 2557 92963-63
E-mail: info@metalxact.com
EU Responsible person: LANGLITZ Metalle GmbH, Siemensweg 6, 48493 Wettringen, Germany, E-Mail: info@metalxact.com
9. disposal 
The product can be fully recycled. Dispose of it in accordance with local regulations for metal waste.
Environmentally friendly: Recycle the product to reduce waste.