Aluminium square bars 10 x 10 mm
Is often purchased together with
Is often purchased together with
You might also be interested in
You might also be interested in
Product information
- Material: AlMgSi0.5
- Material number: EN AW-6060, T66
- Surface: raw/bright
- Manufacturing process: pressed
- Standard: EN 573-3, 755/-1/-2/-4
The sawn edges are unfinished and not deburred. The surface is raw/bright, so scratches etc. cannot be avoided. This is customary in the trade and is no reason for complaint. Nevertheless, we always endeavour to supply all blanks in the best quality.
Product properties:
- low density
- Very good anodising properties
- Very good corrosion resistance
- Smooth surface
- low dimensional tolerances
- good machinability
- cannot be magnetised
- can be decoratively anodised very well
- good weldability and solderability
- suitable for use in the food sector in accordance with EN 602
Aluminium square bars are a semi-finished product and are used in a wide variety of areas due to their many good properties. They are used, for example, as pre-material for various turned and milled parts or as stable replacement feet for various pieces of furniture.
We have high-quality square bars in stock in lengths of up to 6000 mm. If you require a dimension that is not offered in our online configurator, please do not hesitate to contact us.
Note: The following information only applies if you have selected the powder coating option in the configurator when placing your order.
Powder coating - additional information and quality features
Surface features and properties:
- Surface: Powder-coated for an even and robust protective layer.
- Coating thickness: 60 - 80 µm for optimum protection and durability.
- Gloss level (reflectometer value):
- Glossy: 80 - 95
- Matt: 20 - 30
Powder-coated aluminium square bars offer a high-quality, uniform surface that provides both protection and aesthetics. This coating is particularly suitable for applications that require high corrosion resistance, such as in the construction industry, the automotive industry or for decorative purposes. Our square bars are available in various sizes and designs. If you have special requirements or dimensions, please contact us - we will be happy to advise you.
Note: Colour and surface differences may vary slightly due to production batches or screen displays.
Layer formation during powder coating
During powder coating, high voltage creates an electric field between the workpiece and the electrode. The paint particles are negatively charged and adhere evenly to the surface. The coating thickness can be slightly thicker on edges (picture frame effect), which improves corrosion protection. In some cases, post-processing may be necessary if tighter fits are required.
Powder coating - quality requirements
The quality of the coating is checked by viewing the surface from a distance of 3 metres (interior) or 5 metres (exterior). There must be no bubbles, scratches or other visible damage that would impair the protective effect. However, deviations resulting from the raw material during the manufacturing process do not affect the quality of the coating and are therefore excluded from the quality inspection.
Please note that the ordered product may differ from the product images in terms of surface finish due to different production batches. The same applies to colours, which are displayed differently depending on the monitor and graphics card.